Freeduino 2009 Parts
You'll need all of the following parts. If you've purchased a kit, please verify its contents against this list. If you're sourcing your own components, this list includes supplier information.
| Description | QTY | Manufacturer & PN | |
|---|---|---|---|
 | 1 | Freeduino 2009 PCB with FT232. | Fundamental Logic, FTDI FT232RL |
 | 1 | ATmega8,168,328 IC. The kit ships with either an ATmega168 or the newer ATmega328, but you could use an ATmega8 too. | Atmel ATmega168, ATmega328P, ATmega8 |
 | 1 | 28 pin 0.300” DIP socket. | 3M 4828-3004-CP |
 | 3 | 10KΩ 1/4watt resistors. | Xicon 291-10K-RC |
 | 6 | 1KΩ 1/4watt resistors. | Xicon 291-1K-RC |
 | 1 | 1N4004 Diode. | Vishay 1N4004-E3/51 |
 | 1 | 7805 linear regulator. | ON Semiconductor MC7805BTG |
 | 1 | LM358 opamp. | Fairchild LM358AN |
 | 1 | low-rds P-channel MOSFET. | Fairchild FQPF7P06 |
 | 1 | 16MHz crystal. | ABRACON ABL-16.000MHZ-B2 |
 | 2 | 18pF ceramic capacitors. | Xicon 140-50N2-180J-RC |
 | 9 | 100nF (0.1μF) ceramic capacitors. | Vishay K104Z15Y5VE5TL2 |
 | 2 | Bulk electrolytic capacitors. | ?????? |
 | 4 | 3mm LEDs. Use as many or as few colors as you like. Kits ship with either 2 or 4 unique colors. | Kingbright CP7104xx series |
 | 1 | USB B right angle connector. | Adam-Tech USB-B-S-RA or Tyco/AMP 292304-1 |
 | 1 | 2.1mm DC power connector. | Kobiconn 163-7620-E |
 | 1 | 6mm tactile switch. | ????? |
 | 2 | 8 pin female headers. | ?????? |
 | 2 | 6 pin female headers. | ?????? |
The manufacturers and part numbers are who/what we use; there are usually a great number of other parts or multi-source suppliers.